MAGNETIC POWER BANKS / OEM & ODM

Magnetic Power Banks for OEM & ODM

5K–10K · Up to 15W Wireless · 20W–22.5W Wired · Slim / Stand

Magnetic power banks combine phone attachment with wireless charging for compact retail and daily-use projects. Choose the capacity, body thickness and charging route first, then confirm branding, color and packaging.

ZEROSET F91 5,000mAh slim magnetic power bank for OEM ODM wireless charging projects

01 / Product Direction

Choose the charging experience first.

Start with the target phone ecosystem, then choose a slim 5,000mAh route or a 10,000mAh stand platform. Confirm wired output, wireless output and body thickness before appearance changes.

Best fit: branded retail projects focused on cable-free charging, portability or stand functionality. Magnetic attachment alone does not mean Qi2 or MagSafe certification.

02 / Featured Models

Magnetic Power Bank Models

Compare two starting platforms: F91 for thinness and LJ02 for higher capacity with an integrated stand.

F91

5,000mAh / 19.35Wh
Wired output up to 20W · wireless output up to 15W
Ultra-slim 9.3mm body

LJ02

10,000mAh / 36Wh
22.5W wired output · wireless output up to 15W
16.5mm body · integrated stand

03 / Customization & Cooperation

Choose the closest platform, then customize only what matters.

Standard OEM — existing model with logo, color and packaging
Platform Modification — selected structural, stand or charging changes

New Private Mold — fully new magnetic product development
Second-Source / Replacement — comparable route for an existing project

04 / Commercial Basics

MOQ, colors, samples and project fees

Standard OEM — 1,000 pcs / design
Colors — from 500 pcs / color within the total MOQ
Deeper ODM — from 2,000 pcs / model
New private mold — from 3,000 pcs / model

Samples — standard models typically 7–10 days
Mass production — typically around 30 days for mature projects
Packaging — logo and retail packaging by project scope
Design / tooling / sample fee — confirmed after project review

Send Your Project Brief →

Magnetic Power Bank FAQ

What is the typical MOQ?

Standard OEM projects typically start from 1,000 pcs per design. Deeper platform changes start from 2,000 pcs, while new private-mold development starts from 3,000 pcs per model.

Should I choose F91 or LJ02?

F91 is the thinner 5,000mAh route. LJ02 provides 10,000mAh capacity and an integrated stand. The better fit depends on thickness, runtime and retail positioning.

Does magnetic attachment mean Qi2 or MagSafe certification?

No. Magnetic attachment and wireless charging do not by themselves prove Qi2 or MagSafe certification. Protocol and certification claims must be confirmed for the exact SKU.

Can logo, color and packaging be customized?

Yes. Standard colors can start from 500 pcs per color within the total MOQ. Logo and retail packaging are reviewed by model and project scope.

How long do samples take?

Standard-model samples are typically planned around 7–10 days after configuration confirmation. Deeper ODM or tooling work uses a project-specific schedule.

What should I send for a recommendation?

Send the target market, phone models, capacity or thickness target, wired and wireless output requirements, quantity and launch timing. A reference image or SKU is enough to start.

What should be checked for magnetic alignment and holding force?

Check alignment on the target phones or cases, holding stability during normal handling, coil position and charging behavior. Magnetic attachment should be validated together with the intended wireless-charging use case.

How should I choose between 5,000mAh and 10,000mAh magnetic models?

Choose 5K when thinness and portability are the priority. Choose 10K when longer runtime and stand functionality are more important for the retail proposition.

Can wired and wireless charging be used on the same magnetic power bank?

Yes on supported models, but wired output, wireless output and simultaneous-use behavior should be confirmed for the exact SKU before approval.

What should be included in a magnetic power bank OEM/ODM brief?

Include target phones, capacity or thickness target, wired and wireless output, stand requirement, quantity, branding, color, packaging, destination market and any certification requirements.

Get Your Custom Power Bank Quote

Share what you already know. A finished specification is not required.